Breaking in a New System

So of course, when I brewed my first batch, my efficiency was poor. Now, the first element I am going to blame this on is the crush. The grains were very coarse in comparison with my previous all-grain brews. My crushed grains are typically more powdery in texture... this time is was not. I know, I need to get a grain mill.

I broke in the system with a Weissbier. Here is the recipe, it is simple, sweet, and should work out just fine. I used WLP300 for the yeast. Good things have been said of WLP380, next time I will probably try it.

Weissbier 22_5_07

15-A Weizen/Weissbier

Size: 16.36 L

Efficiency: 66.0%

Attenuation: 76.0%

Calories: 166.62 per 12.0 fl oz

Original Gravity: 1.050 (1.044 - 1.052)

====================#===========

Terminal Gravity: 1.012 (1.010 - 1.014)

================#===============

Color: 4.5 (2.0 - 8.0)

==============#=================

Alcohol: 5.0% (4.3% - 5.6%)

================#===============

Bitterness: 13.17 (8.0 - 15.0)

===================#============

Ingredients:

4.75 lbs Pale Wheat Malt

4.75 lbs Pilsner Malt

0.75 oz Hallertau Mittelfruh (3.2%) - added during boil, boiled 60 min

0.5 oz Hallertau Mittelfruh (3.2%) - added during boil, boiled 10 min

1.0 ea White Labs WLP300 Hefewizen Ale

Schedule:

Ambient Air: 70 °F

Source Water: 70.0 °F

Elevation: 0.0 m

00:10:10 Mash In - Liquor: 6.62 L; Strike: 137.7 °F; Target: 120 °F

00:30:10 Rest - Rest: 20 min; Final: 118.0 °F

00:31:10 Infusion - Water: 7.85 L; Temperature: 194.8 °F; Target: 154.0 °F

01:31:10 Sac. Rest - Rest: 60 min; Final: 148.7 °F

02:01:10 Sparge - FirstRunnings: 0.0 L sparge @ 168 °F, 7.19 L collected, 15 min; Second: 9.5 L sparge @ 200 °F, 9.5 L collected, 15 min; Total Runoff: 17.09 L

Notes:

Put some comments here:

Results generated by BeerTools Pro 1.0.26